fEATURE OPERATION
fEATURE OPERATION
TO SELECT fAN SPEED
• There are 3 fan speeds, as well
as automatic*.
* For automatic fan speed,
the speed of the indoor fan
is automatically adjusted
according to the operation.
TO ADjUST AIRfLOw
DIRECTION
• To ventilate air in the room.
• There are 5 selections in addition to automatic
vertical airflow direction.
• If automatic vertical airflow direction has
been set, the louver swings up and down
automatically.
• Please do not adjust the vertical airflow
direction louver manually.
• Horizontal airflow direction louver could
be only adjusted manually. Be careful not
to insert your fingers into the unit to avoid
injuring by cross-flow fan.
TIMER SETTING
TIMER SETTING
TO SET THE TIMER
• When you want the air conditioner to turn ON or OFF automatically.
Select ON/OFF timer and Set
the ON/OFF time hourly.
To cancel ON or OFF timer, press
• The timer indicator of the indoor unit will light up during the timer
operation.
• When the ON-TIMER is set, operation will start 15 minutes before
the actual set time in cooling operation and 30 minutes in heating
operation.
• If you press operation
operation, timer setting will be cancelled.
• When a power failure occurs, the timer setting will be cancelled.
Once power is resumed, reset the timer.
Confirm
the setting.
.
button during the timer setting
AUTO
HEAT
COOL
DRY
Hints
■ Temperature setting of 1°C higher in cool mode or
2°C lower in heat mode than the desired temperature
performs a 10% power saving.
■ To reduce power consumption during cool mode, close
the curtains to prevent the sunlight and heat from
coming in.
● To turn off the air conditioner, press
FAN
SPEED
AIR
SWING
.
5