Setting The Timer; Convenience Operation; I Sleep Mode Operation; I Economy Mode Operation - Panasonic CS-C18BKP Instrucciones De Operación

AUTO
FAN
8
POWERFUL
MODE ECONOMY
7
AIR SWING
1 2
1
ON
5
OFF
TIMER
CHECK RESET CLOCK

SETTING THE TIMER

Ensure that the current time is correct before setting the
timer. The timer cannot be set if the time display is
flashing.
I ON-TIMER Operation
To start the air conditioner operation automatically.
• Press 1 to set the operation.
• Press 2 to increase or decrease the time.
• Then press 3.
• To cancel this operation, press 4.
I OFF-TIMER Operation
To stop the air conditioner operation automatically.
• Press 5 to set the operation.
• Press 2 to increase or decrease the time.
• Then press 3.
• To cancel this operation, press 4.
G Timer Mode Operation Details
• When the ON-Timer is set, operation will start
before the actual set time. This is to enable the
room temperature reaches the set temperature at
the set time.
Cooling Model
COOL,DRY, – 15 minutes
COOL,DRY, – 15 minutes
AUTO in advance
HEAT, AUTO – 30 minutes
• Once the ON-Timer is set, operation will start at the
set time everyday.
• The current time is not displayed when the timers
are set.
• When both timers are used together, the TIMER
mode indicator on the indoor unit remains lit even
when the operation is stopped by the OFF-TIMER.
7

CONVENIENCE OPERATION

OFF/ON

I Sleep Mode Operation

To obtain a comfortable room temperature while
SLEEP
6
sleeping:-
• Press 6.
FAN SPEED
• Sleep mode indicator on the indoor unit will light up.
• To cancel this operation, press once more.
3
3
SET
G Sleep Mode Operation Details
4
CANCEL
• When the room temperature reaches the set
2
temperature, the airflow volume will change to low
automatically.
• Sleep Mode Operation time is 8 hours.
• When used together with the timer, the timer has a
priority.
Temperature
S T
e
e
m
t
p
t
e
i
r
n
a
g
t
u
r
e
Temperature
S
T
Heat Pump Model
e e
m
t
p
t
e
i
r
n
a
in advance
g
t
u
in advance
r
e
Cooling Model
Approx. 0.5°C
increase.
Approx.
0.5°C
increase.
• Cooling or Soft Dry
Sleep
Operation for sleep shift
Operation
operation will start to
Sleep shift
button is
avoid overcooling.
operation
pressed.
starts.
← 1 hour →
0~1 hour
after approx. 8 hours of sleep shift
operation, it will stop automatically.
Heat Pump Model
Approx. 0.5°C
increase.
Approx.
0.5°C
• Cooling or Soft Dry
increase.
Operation for sleep shift
operation will start to
avoid overcooling.
Sleep shift
operation starts.
• Heating operation for
sleep shift operation will
Sleep
start to avoid overheating.
Operation
Approx. 2°C
button is
← 1 hour →
decrease.
pressed.
Approx. 3°C
← 1 hour →
decrease.
0~1 hour
after approx. 8 hours of sleep shift
operation, it will stop automatically.

I Economy Mode Operation

To save electrical power consumption.
Please use this mode when the room has reached
your desired temperature.
• Press 7.
* Economy mode indicator (green) on the indoor unit
will light up.
• Press once more to cancel this operation.

I Powerful Mode Operation

To obtain the set temperature quickly.
• Press 8.
* Powerful mode indicator (orange) on the indoor
unit will light up.
* Powerful mode will operate for 15 minutes only.
• To cancel this operation, press once more.
G Economy / Powerful Mode Operation Details
• Economy and Powerful operation cannot be
selected simultaneously.
• The changes of the temperature and airflow volume
are automatic.
• The remote control display remains unchanged.
• If sleep button or operation mode button is pressed,
economy or powerful operation will be cancelled.
• During FAN – Air circulation operation, the powerful
and economy operation are not available.
Time
(cooling model only)
Economy Mode Temperature
Operation
0.5°C higher
COOL / DRY than set temp.
HEAT 0.5°C lower
(for Heat Pump than set temp.
model only)
Powerful Mode Temperature
Operation
3°C lower
COOL / DRY
than set temp.
HEAT
3°C higher
Time
(for Heat Pump
than set temp.
model only)
Airflow
volume
Super Low
Automatic
Airflow
volume
Super High
Automatic