Cleaning Instructions; Outlet Instructions; Component List - Weston 75-0601-W Manual De Instrucciones

Ocultar thumbs Ver también para 75-0601-W:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2 Lid
1 Trays
Base

COMPONENT LIST

DIAGRAM NUMBER
1
2
If any components of this unit are broken, the unit does not operate properly or you
need a replacement instruction manual, visit us on the web at
Or call Weston Products LLC Toll Free at
Monday thru Friday 8:00am-5:00pm ET. Outside the U.S. call 001-216-901-6801
4
Diffuser
Power Switch
PART DESCRIPTION
PART NUMBER
TRAY (1)
75-0602
LID
75-0603
WestonProducts.com
1-800-814-4895

CLEANING INSTRUCTIONS

WARNING!
Before cleaning, assembling or disassembling the
appliance, make sure the appliance is OFF and the PLUG IS REMOVED
FROM THE OUTLET/POWER SOURCE!
1. Clean the Trays, Lid and the Base before using the Dehydrator for the first time
and after each use.
Turn the Power Switch to the OFF position. Disconnect the Power Cord from the
electrical outlet.
2. Allow the Dehydrator to completely cool before cleaning.
3. Remove the Lid and the Trays from the Base.
4. Wipe the Base clean, inside and out, with damp sponge or soft cloth. Be careful
not to splash water into the Diffuser while cleaning. Water could damage the
heating element and the increases the risk of electric shock. DO NOT immerse
the Dehydrator in water.
5. Clean the Trays with warm, soapy water. Rinse with clear water and dry
immediately.
NOTE: No parts on this appliance are dishwasher safe.

OUTLET INSTRUCTIONS

To reduce the risk of electrical shock, this plug must
fit fully into the outlet. If the blades do not fit into
the outlet, try turning the plug around. If the plug
still does not fit into the outlet, contact a qualified
electrician. DO NOT attempt to modify the plug in
any way.
TRAY DEPTH ADJUSTMENT
For thinner foods, adjust the Trays
to be 1/2" (1.3 cm) high. When
stacking the Trays, align all the
Tabs in a row (FIGURE 1).
For thicker foods, adjust the Trays
to be 1" (2.5 cm) high. When
stacking the Trays, align the Trays
so that the Tabs sit on the Shelves
(FIGURE 2).
FIGURE 1
Shelf
Tab
1/2" (1.3 cm) space between Trays
FIGURE 2
Tab
Shelf
1" (2.5 cm) space between Trays
5

Publicidad

Tabla de contenido
loading

Tabla de contenido