SlimBANK T18 USB QRG
EN
The SlimBANK T18 USB is a tri-color LED panel. Removable barn doors direct light
Product
where needed. Built-in infrared technology offers easily controllable static colors and
Description
automated programs with the optional IRC-6 remote. DMX control wirelessly with the
convenient built in D-Fi USB port. Eighteen high-power, tri-color LEDs nearly
eliminate multicolored shadows and the smooth and even output makes it perfect for
frontlight applications.
D-Fi USB Port
Menu Buttons
LED Display
Microphone
Safety Cable
Pass-Through
Product
Overview
Mounting Brackets
Fuse Holder
Bracket
Adjustment
Power In
Power Out
DMX In/Out
Knob
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port.
Doing so may cause damage to the product.
This product has an auto-ranging power supply that can work with an input voltage
AC Power
range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely
disconnect from power via breaker or by unplugging it.
For the maximum number of SlimBANK T18 USB products that you can power link at
Power Linking
each voltage, see the User Manual or the sticker on the product.
1. Disconnect the product from power.
Fuse
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
Replacement
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with
a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
3