Powering On Sequence - LG 600 Manual De Usuario

Notice
• Remember to charge the new battery fully after changing it.
• Do not remove your battery or SIM card while charging.
• "Battery Charging" is displayed on the screen after connecting the
travel adapter. Only if the battery is totally empty, Call Indicator
Light will be on without displaying "Battery Charging".
• The moving bars of battery icon will stop after charging completely.
Note
• In case of the battery is not charged properly...
1. After switching On/Off Power key, please try to recharge it.
2. In case the battery is attached, please detach it from the phone.
Then place it back to recharge it again.

Powering On Sequence

In order to get started with your phone,
follow the steps.
1. Press and hold
tone from your phone to switch on.
2. If PIN code request of your SIM card is
enabled, your phone asks you to enter PIN
code. Enter the PIN code, then your phone
connects to a GSM network and the
network name appears on the display
shortly.
3. And then your phone goes to standby
mode. If the PIN code is disabled, your
phone connects to the network without the
request of entering PIN code.
Getting Started
button until you hear a
21