STOK QUATTRO SGP4330 Manual Del Operador página 10

left
side
panel
rear
panel
brace
bolt
(ee)
slot
Fig. 6
STEP 3: ASSEMBLiNG BRAcES AND REAR
PANEL
See Figures 6 - 7.
installing the rear panel:
 Place bolts, M5 x 12 mm (EE), through the side of the
rear panel and into the side panel. Tighten securely.
Repeat for the other side.
installing the braces:
 Secure two braces to the base and side panels using
M5 x 12 mm bolts (EE). Tighten securely.
 Secure the remaining two braces to the side and rear
panels using M5 x 12 mm bolts (EE). Tighten securely.
installing the front panel:
 From the front of the base, align the holes in the front
panel with the holes at the top of the side panels.
 Secure the front panel to the side panels using four
bolts, M5 x 12 mm (EE).
ASSEMBLY
right side
panel
tab
tab
front
panel
Fig. 7
STEP 4: ATTAcHiNG iNSERT STORAGE TO
BASE
See Figure 8.
 Place the insert storage inside the cabinet on the left
side. Align holes in the insert storage to holes in the
base.
 Secure the insert storage to the base using four bolts,
M4 x 12 mm (AA).
bolt
(aa)
base
Fig. 8
10
bolt
(ee)
insert
storage