Cleaning And Maintenance; Technical Specifications; Electrical Data - Velleman Vellight LEDAD1NW Manual Del Usuario

7.

Cleaning and Maintenance

 This luminaire does not have a built-in device to disconnect it from the electric mains. Make sure to
electrically isolate the luminaire before installation or maintenance activities are performed.
 All screws shall be tight and free of corrosion.
 The housing, the visible parts, the mounting supports and the installation location (e.g. ceiling, suspension,
etc.) shall not be deformed, modified or tampered with; e.g. do not drill extra holes in mounting supports,
do not change the location of the connections...
 Mechanically moving parts must not show any signs of wear and tear.
 The electric power supply cables must not show any damage. Have a qualified technician maintain the
device.
 If the protective shield is damaged, disconnect the lamp immediately from the mains. Do not use the lamp
with a cracked or broken protective shield. The protective shield is not replaceable.
 Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
 There are no user-serviceable parts.
 Contact your dealer for spare parts if necessary.
8.

Technical Specifications

electrical data

power LED module
total nominal power
nominal voltage driver
nominal voltage LED module
power factor
energy consumption kWh/1000h
light technical data
colour
colour temperature
beam angle
luminous flux
colour rendering index
starting time
warm-up time (60 %)
lifespan
nominal life time
number of switching cycles
dimensions & weight
dimensions LED module
cable length for each LED
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our website
www.velleman.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
V. 01 – 18/04/2014
LEDAD1NW
21 W
< 26 W
230 VAC
1 A constant current / 20–30 VDC max. (incl.)
0.92
26
neutral white
3900 K (± 100 K)
n.a.
1600 lm
> 80
< 0.5 s
< 1 s
30 000 h
15 000
Ø 600 x 70 mm
± 115 cm
3800 g
5 ©Velleman nv