Kitchen Aid KFP0919 Manual Del Usuario página 8

Ocultar thumbs Ver también para KFP0919:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

USING THE FOOD PROCESSOR
INSTALLING THE REVERSIBLE SLICING/SHREDDING DISC OR
SLICING DISC
To slice: Turn the disc so that the
raised slicing blade is facing up.
1
To shred: Turn the disc so that the
small, raised shredding blades are
facing up.
Hold the disc by its center hub and
lower it onto the drive adapter,
aligning the mark on the center hub
of the disc to the matching mark on
2
the adapter. When properly placed,
the disc should be level with the top
of the bowl. If the disc falls to the
storage position, lift it out, turn it 90°,
and lower it again.
8 | USING THE FOOD PROCESSOR
Alignment
marks
Process
Storage
The disc can be placed in two different
positions: level with the top of the bowl
for processing, and lower, inside of the
bowl for storage.
NOTE: While the disc will operate
in the storage position, it will not
perform as well. Make sure the disc is
level with the top of the bowl for best
performance.
Install the work bowl cover, and be
3
sure the lid latch is pushed down to
the locked position.

Publicidad

Tabla de contenido
loading

Tabla de contenido