Getting Started - Velleman DVR16H3 Guía Rápida

Connecting Local Area Network (LAN)
Connect the DVR to a local network by plugging a network cable into the LAN port at the back of the DVR. Connector type is
8P8C (RJ45). To setup the network connection, press the Menu button and select
CD-ROM for details.
8.

Getting Started

1. Make sure the connected cameras are powered on.
2. Set the power switch of the DVR at the back of the device to ON.
It takes about 15 to 30 seconds to start up.
Menu Overview
 Move your mouse to enter the DVR password with the password keypad.
The default user name and password are both "admin".
The status will change from
Right-click anywhere on the screen to show the main menu, and right-click again to exit.
QUICK START
SYSTEM
EVENT INFORMATION
ADVANCED CONFIG
SCHEDULE SETTINGS
Refer to the full user manual on the included CD-ROM for more details.
Setting Date and Time
Before using the DVR, the time and date shall be set to get a valid time stamp.
1. Right-click the screen and enter the admin password.
2. Click the QUICK START icon.
3. Select TIME SETUP to set date and time.
Note: once recording started, do not change date or time as this will make it very difficult to find back the recorded files.
Note: when using the DVR for the first time and the correct time is set, leave it on for at least 48 hours.
Password Setting
1. Right-click the screen and enter the admin password.
2. Click the SYSTEM icon.
3. Go to ACCOUNT. Select the password you want to set and click EDIT.
Note: an operator cannot access the main menu, only the quick menu bar (see below).
4. Press the cursor up (
the next character, or use the mouse to select the desired value. Repeat this for all four password numbers.
Note: the default admin password is admin.
V. 01 – 25/09/2014
(key lock) to (unlock).
Click to set the status display, image settings, and date & time.
Click to set the system configurations.
Click to enter the event search menu.
Click to set CAMERA, DETECTION, ALERT, NETWORK, DISPLAY, RECORD, DEVICES &
NOTIFY.
Click to set record timer, detection timer & alarm timer.
) or down ( ) button to select the value of the first number and press enter to save and go to
DVR16H3
6
. Refer to the full manual on the included
©Velleman nv