Step 1: Installation; Installation Without A Rack - Sony Ipela Manual De Instalación

Step 1: Installation

Before setting up, be sure that the location for
installation provides sufficient space and strength to
support the unit.
The NSR-1200 weighs approx. 13.5 kg (29.8 lb.), the
NSR-1100 weighs approx. 12 kg (26.7 lb.), and the
NSR-1050H weighs approx. 11.5 kg (25.4 lb.). The
dimensions for the unit are as follows.
16.9 in.
(430 mm)
Top
16.9 in. (430 mm)
When the front bezel is closed
16.4 in. (417 mm)
1.6 in. (40 mm) 14.8 in. (377 mm)
12
Step 1: Installation
When the front bezel is opened
3.4 in.
(87 mm)
16.4 in.
(417 mm)
You can install the unit on a rack using the optional rack
mounting kit.

Installation Without a Rack

Attach the provided rubber feet to the recorder.
Place the recorder upright so that the bottom surface is
visible. Then affix the adhesive surfaces of the rubber
feet on the bottom of the recorder as illustrated below.
19.4 in. (494 mm)
4.6 in.
(117 mm)
4.2 in.
14.8 in. (377 mm)
(106 mm)
18.9 in. (479 mm)
4.0 in.
(102 mm) 14.8 in. (377 mm)
Remove
the film
Rubber
foot
Bottom of the unit