Ruwido Easytip Z1 Manual De Funcionamiento página 8

U s e r M a n u a l
Within 5 seconds after the double flash press and
Step 4
hold the (ON/OFF), this will start the search mode.
You must hold this key down continually to enable
the search. Confirmation of the search can be
noted by the red LED flashing every other second.
If the remote finds a compatible code the TV will
go into standby mode. After this test all other
functions of the remote.
PLEASE DO NOT ASSUME THAT THE FIRST CODE
FOUND IS THE CORRECT CODE.
After your TV, has switched into standby mode,
Step 5
press and hold the (F) key until the LED flashes
twice. This will store the code.
IMPORTANT!
Code search begins from the last code number found in the
previous search. When the end of the code list is reached the
LED flashes 3 times in quick succession and the search
restarts from the beginning of the list.
Determining the 4-number
code found by automatic code search
(after using search facility)
It is useful to know which code your device responded to
in case it is inadvertently changed at any later date.
Press and hold the (F) key until the LED flashes 3
Step 1
times. (approx 2 seconds)
After the two flashes and within 5 seconds input
Step 2
the code 1112. After you have input the code, wait
for the LED to flash twice, this confirms that the
number you selected has been installed into the
unit correctly.
8
Helpline 00800 31133113