Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
About This Guide
The EZpar T6 USB Quick Reference Guide (QRG) has basic product information such as mounting, menu options, and
DMX values. Download the User Manual from
Disclaimer
The information and specifications contained in this QRG are subject to change without notice.
Safety Notes
These Safety Notes include important information about installation, use, and maintenance.
•
ONLY connect this product to a grounded and protected circuit.
•
Always disconnect from power before cleaning or replacing the fuse.
•
DO NOT look at the light source when the product is on.
•
Never disconnect this product from power by pulling on the cord.
•
Do not use if the power cable is damaged in any way.
•
When mounting this product and controller overhead, use a safety cable.
•
DO NOT allow flammable materials close to the unit while operating.
•
DO NOT touch the product's housing when it is on because it will be hot.
•
The voltage of the outlet to which you are connecting this product must be within the range stated
on the decal or rear panel of the product.
•
The product is not intended for permanent installation.
•
This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose this product
to rain or moisture.
•
Always mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
•
Never connect this product to a dimmer or rheostat.
•
Replace the fuse with the same type and rating.
•
The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at higher
temperatures.
•
When mounting this product overhead, ALWAYS use a safety cable.
•
ONLY carry this product by the hanging/mounting brackets.
•
DO NOT open this product. It contains no user-serviceable parts.
•
To eliminate unnecessary wear and improve its lifespan, during periods of disuse completely
disconnect the product from the power via breaker or by unplugging it.
Contact
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact your distributor to request support or return a
product. Visit
www.chauvetdj.com
To Begin
Carefully unpack the product and check that all the parts are in the package, and are in good condition.
If the box, or any of the contents, appear damaged from shipping, or show signs of mishandling, save all packaging and
file a claim with the carrier immediately. Do not notify Chauvet. Failure to report damage to the carrier immediately, or
failure to have all packaging available for inspection, could invalidate your claim.
For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a
claim with Chauvet within 7 days of delivery.
What is Included
•
EZpar T6 USB
•
Power Cord
•
Warranty Card
•
Quick Reference Guide
00
EZpar T6 USB QRG Rev. 1
QUICK REFERENCE GUIDE
www.chauvetdj.com
for contact information.
for more details.
EN
1
Publicidad
Tabla de contenido
