Attaching the unit to a wall (Optional)
Wall mount instructions
4. Hang the unit on the wall.
Hook the unit securely onto the mounting
screws
.
C
•
Connect the FM/AM antenna before hanging the
main unit on the wall (➡ page 4).
•
After hanging the unit, release your hand carefully
to confirm the unit sits securely on the wall.
5. Install the safety holder.
Fix the safety holder onto the wall bracket.
Drive safety holder screw
C
the wall.
Safety holder screw
Removing the unit from the wall
Remove safety holder screw
Unmount the unit from the wall.
Unscrew fixing screw
(2 pieces).
B
Hold down both the catches and then slide the wall bracket off the unit
(➡ right).
Reattach the stand to the bottom of the unit and secure it with fixing
screw
(2 pieces).
A
Remove the mounting screw
•
Remove the fall-preventive wire before step if you are using it.
(continued)
Wall
to secure the safety holder onto
C
Safety holder
Fixed to
the wall
and the safety holder.
C
(2 pieces) from the wall.
C
(continued)
Slot both screws into this position firmly.
g Fall-preventive measure (Optional)
Thread a wire (commercially available) through the slot on the
wall bracket before step 4 (➡ above).
Fix the wire to the wall with a screw (commercially available)
after step 5 (➡ left).
•
Fix the screw to the wire so that a slack of no more than
5 cm (1
/
") is kept in the upper center part of the main unit.
31
32
Metal fitting
Screw
Wire
Slot for
Wire
wire
Wall bracket
Pen or a blunt object
Catches
7
7