Publicidad
Idiomas disponibles
Idiomas disponibles
M-Style Coupler
Pin
L-Style Coupler
Lever
Pin
Collar
(Back)
H-Style Coupler
Pin
Latch
Use only Cequent Performance Products' parts or parts of equal quality for repair. Replacement parts are available through Cequent Performance
Products' Customer Service Department, 1-800-632-3290. Please specify product model number.
Limited Warranty. Cequent Performance Products, Inc. ("We" or "Us") warrants to the original consumer purchaser only ("You") that the product will
be free from material defects in both material and workmanship for a period of five years, ordinary wear and tear excepted; provided that
installation and use of the product is in accordance with product instructions. There are no other warranties, express or implied, including the
warranty of merchantability or fitness for a particular purpose. If the product does not comply with this limited 5 year warranty, Your sole and
exclusive remedy is that We will replace the product without charge to You and within a reasonable time or, at our option, refund the purchase price.
This warranty is not transferable.
Limitations on the Warranty. This limited warranty does not cover: (a) normal wear and tear; (b) damage through abuse, neglect, misuse, or as a
result of any accident or in any other manner; (c) damage from misapplication, overloading, or improper installation, including welds; (d) improper
maintenance and repair; and (e) product alteration in any manner by anyone other than Us, with the sole exception of alterations made pursuant to
product instructions and in a workmanlike manner.
Obligations of Purchaser. To make a warranty claim, contact Us at 47912 Halyard Dr. Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the
product by model number, and follow the claim instructions that will be provided. Any returned product that is replaced or refunded by Us becomes
our property. You will be responsible for return shipping costs. Please retain your purchase receipt to verify date of purchase and that You are the
original consumer purchaser. The product and the purchase receipt must be provided to Us in order to process Your warranty claim.
Remedy Limits. Repair or replacement is Your sole remedy under this limited warranty or any other warranty related to the product. We shall not be
liable for service or labor charges incurred in removing or replacing a product or any incidental or consequential damages of any kind.
Assumption of Risk. You acknowledge and agree that any use of the product for any purpose other than the specified use(s) stated in the product
instructions is at Your own risk.
Governing Law. This limited warranty gives You specific legal rights, and You also may have other rights which vary from state to state. This
limited warranty is governed by the laws of the State of Michigan, without regard to rules pertaining to conflicts of law. The state courts located
in Oakland County, Michigan shall have exclusive jurisdiction for any disputes relating to this warranty.
To Couple:
1) Block trailer wheels.
2) Align hitch ball beneath coupler.
3) If the coupler is closed, open it by removing the pin behind the collar and sliding the collar away from
the ball pocket. Be sure the coupler cap is open and holds the collar back.
4) Lower the trailer onto the hitch ball.
5) Visually check that the hitch ball is fully seated in the coupler.
6) After the hitch ball is seated in the coupler, carefully close the coupler cap. Be sure the collar springs
toward the ball pocket and captures the coupler cap.
7) Reinsert the pin behind the collar. Do not tow without pin in place.
8) Always secure safety chains to vehicle before towing according to SAE J684.
To Uncouple:
1) Block trailer wheels.
2) Open the coupler by removing the pin behind the collar and sliding the collar away from the ball pocket.
Be sure the coupler cap is open and holds the collar back.
3) Raise the trailer from the hitch ball.
Coupler is Open
Cap is Open
Cap (Open)
Body
To Couple:
1) Block trailer wheels.
2) Align hitch ball beneath coupler.
3) If the coupler is closed, open it by removing the pin in the latch and lifting the latch. Be sure the coupler
cap is open and holds the collar back.
4) Lower the trailer onto the hitch ball.
5) Visually check that the hitch ball is fully seated in the coupler.
6) After the hitch ball is seated in the coupler, carefully close the coupler cap and lower the
latch. Be sure the collar springs toward the ball pocket and captures the coupler cap.
7) Reinsert the pin in the latch. Do not tow without pin in place.
8) Always secure safety chains to vehicle before towing according to SAE J684.
To Uncouple:
1) Block trailer wheels.
2) Open the coupler by removing the pin in the latch and lifting the latch. Be sure the coupler cap is open
and holds the collar back.
3) Raise the trailer from the hitch ball.
How to Order
Limited Five Year War ranty
Operation
Collar
(Forward)
Coupler is Closed
Collar is Capturing Cap
Cap (Closed)
Body
47912 Halyard Dr. Suite 100
Plymouth, MI 48170 USA
800/632-3290
www.cequentgroup.com
Publicidad
