Publicidad
Idiomas disponibles
Idiomas disponibles
To Couple:
1.
Block trailer wheels.
2.
Align hitch ball beneath coupler.
3.
Set coupler into the open position by lifting up on the handle and slide
the locking plate into the detent.
4.
Lower the trailer onto the hitch ball.
5.
Visually check that the hitch ball is fully seated in the coupler.
6.
Slide the locking plate over and place handle down into the closed posi-
tion. When using a recessed ball, check to make sure handle and locking
plates are clear of any interference with safety chains and D-rings.
7.
Insert optional indicator pin or lock through hole in fixed plate.
To Uncouple:
1.
Block trailer wheels.
2.
Remove indicator pin or lock and set the handle into the open position.
3.
Slide the locking plate into the open position and raise the trailer from the
hitch ball.
Keep ball pocket and mechanism clean. The following procedures should be performed at least annually:
•Check hardware torque
A Handle repair kit is available to replace worn or malfunctioning parts. This kit includes the
Handle assembly, Locking cam, Groove pin, Bushing and Torsion spring.
Required tools = hammer and 5/32" punch. To install;
1. Support the coupler from dropping before loosening pinch bolts. Remove pinch bolts
and lower coupler assembly from the trailer. With ball pocket facing up (Fig. 1), take visual
note of the parts and their orientation, paying particular attention to the function of the handle
Figure 2
and slide the handle through the assembled parts. Lastly, align the hole in the handle with hole in cam, and fix groove pin into place. A properly
assembled handle will make a loud "clack" from an open to a closed position when the locking cam hits against the coupler casting.
Use only Cequent Performance Products' parts or parts of equal quality for repair. Replacement parts are available through Cequent Performance
Products' Customer Service Department, 1-800-632-3290. Please specify product model number.
Limited Warranty. Cequent Performance Products, Inc. ("We" or "Us") warrants to the original consumer purchaser only ("You") that the product will be free from
material defects in both material and workmanship for a period of five years, ordinary wear and tear excepted; provided that installation and use of the product is in
accordance with product instructions. There are no other warranties, express or implied, including the warranty of merchantability or fitness for a particular purpose.
If the product does not comply with this limited 5 year warranty, Your sole and exclusive remedy is that We will replace the product without charge to You and
within a reasonable time or, at our option, refund the purchase price. This warranty is not transferable.
Limitations on the Warranty. This limited warranty does not cover: (a) normal wear and tear; (b) damage through abuse, neglect, misuse, or as a result of any acci-
dent or in any other manner; (c) damage from misapplication, overloading, or improper installation, including welds; (d) improper maintenance and repair; and (e)
product alteration in any manner by anyone other than Us, with the sole exception of alterations made pursuant to product instructions and in a workmanlike manner.
Obligations of Purchaser. To make a warranty claim, contact Us at 47912 Halyard Dr. Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product by
model number, and follow the claim instructions that will be provided. Any returned product that is replaced or refunded by Us becomes our property. You will be
responsible for return shipping costs. Please retain your purchase receipt to verify date of purchase and that You are the original consumer purchaser. The product
and the purchase receipt must be provided to Us in order to process Your warranty claim.
Remedy Limits. Repair or replacement is Your sole remedy under this limited warranty or any other warranty related to the product. We shall not be liable for service
or labor charges incurred in removing or replacing a product or any incidental or consequential damages of any kind.
Assumption of Risk. You acknowledge and agree that any use of the product for any purpose other than the specified use(s) stated in the product instructions is at
Your own risk.
Governing Law. This limited warranty gives You specific legal rights, and You also may have other rights which vary from state to
state. This limited warranty is governed by the laws of the State of Michigan, without regard to rules pertaining to conflicts of law.
The state courts located in Oakland County, Michigan shall have exclusive jurisdiction for any disputes relating to this warranty.
Maintenance
•Grease all fittings & ball pocket
Available Parts Kit
and locking cam. Rotate handle exposing the groove pin. With a
punch, remove the groove pin and slide handle from the coupler.
Remove and discard all old parts. DO NOT reassemble using any
previously existing parts - only use components supplied within the
parts kit.
2. With a dab of grease, secure bushings within the coupler body.
Assemble the straight leg side of the torsion spring into the locking
cam and lower into the casting. Be certain the cam lobe notch
rests against inside edge of the coupler casting (Fig. 2). Next,
insert the bent-leg end of the spring into bushing side of casting
How to Order
Limited Five Year War ranty
Operation
Locking plate
Open Position - DO NOT TOW!
Closed Position - OK to tow
•Inspect retaining pin; replace if necessary
Bushing
Torsion spring
Ball pocket
Grease
fitting
Figure 1
47912 Halyard Dr. Suite 100
Plymouth, MI 48170 USA
www.cequentgroup.com
Groove pin
Locking cam
Grease fitting
Handle
assembly
800/632-3290
Publicidad
