AUtec MBC825A Manual De Usuario página 22

Instructions for use
Battery charger MBC825A can only recharge MBM06MH bat-
teries: if it is used in a different way, it is used improperly
and dangerously. Autec shall not be held liable for conse-
quences due to improper, wrong or irrational use.
AC battery chargers have two signalling lamps:
CHARGE LIGHT (YELLOW)
Off
Blinking
(when inserting the battery)
Steady on
POWER LIGHT (GREEN)
Off
On
To recharge a battery:
1.connect the battery charger to the AC mains (the POWER light
switches on)
2.insert the battery in its proper housing in the battery charger.
The CHARGE light switched on indicates that recharging has started.
3.wait until the battery is completely charged (the CHARGE light
goes off)
4.remove the battery. If the battery is not removed at the end of the
recharging process, the charger switches to trickle charging.
5.disconnect the battery charger from the AC mains (the
POWER light switches off)
Page 22
MEANING
The battery is fully charged or is not
inserted
The battery is completely discharged
The battery is being recharged
MEANING
The battery charger is not powered
The battery charger is powered
LIMBS0U3-00_eng.fm