Customer Care - mothercare KB487 Instrucciones

safety & care notes
safety & care notes
IMPORTANT, RETAIN FOR FUTURE
REFERENCE: READ CAREFULLY
WARNING! Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas fires, etc,
in the vicinity of the cot/bed.
WARNING! Do not use the cot/bed if any part is broken, damaged torn or missing, approved replacement parts can
be obtained from Mothercare.
WARNING! Do not leave anything in the cot/bed, or place it close to another product which could provide a foothold
or present a danger of suffocation or strangulation. For example strings, blind/curtain cords etc.
WARNING! Do not use more than one mattress in the cot.
WARNING! Children are likely to play, bounce, jump and climb on beds, therefore the child's bed should not be
placed too close to other furniture or windows, blind cords, curtain pulls or other strings or cords, and should be
placed either tight to any wall or have a gap of 300 mm between the wall and the side of the bed.
WARNING! Do not place this child's bed near heat sources, windows and other furniture.
The width and length are specified because it is important that the gaps between the mattress and the sides and
the ends of the cot will not exceed 30mm.
Cots which convert to beds are intended from birth up to approximately 4 years.
The size of the mattress to be used with the child's bed is 1400mm long by 700mm wide and up to 100mm in thickness.
The lowest position of the mattress base is the safest, and should be used as soon as the baby is old enough to sit up.
Always keep medication, string, elastic, small toys or similar small items out of reach from any position of the cot.
The product conforms to BS EN 716-1:2008+A1:2013 and BS 8509:2008+A1:2013.
To prevent injury from falls, when the child is able to climb out of the cot, the cot shall no longer be used for that child.
Thickness of the mattress chosen must not reduce the internal depth (from mattress surface to top of the side) to less
than 500mm with the base in its lowest position or 200mm with the base in its highest position.
All assembly fittings should be tightened properly, checked regularly and re-tightened as necessary.
The cot/bed must be used on a level and stable surface, away from electric sockets.
Never move the cot/bed with a child in it.
Once assembled do not dismantle for transportation or storage.
Excessive chewing may damage the wood and cause splintering.
Style Number: KB487/KB488
care of your product
Your cot/bed can be cleaned by wiping with a damp cloth and drying with a soft clean cloth.
Do not use abrasives, bleach, alcohol or ammonia based household polishes.
Take care when handling or moving. Careless handling can damage wooden furniture.
Wood is a natural material, the colour will darken with age.

customer care

Your child's safety is your responsibility.
If you have a problem with this product or require replacement parts, please contact your nearest
Mothercare store.
UK Customer Care Details:
Customer Care
Mothercare
Cherry Tree Road
Watford
Herts. WD24 6SH
Mothercare Customer Care Line: 0344 875 5111
www.mothercare.com
Version 3.0 02/04/17
14
© Mothercare UK Ltd. 2017