Playing Compact Disc - Denver TCU-206 Manual De Usuario

Precautions for use
Installation
•
Unpack all parts and remove protective material.
•
Do not connect the unit to the mains before checking the main voltage and before all other connections have been made.
•
Do not cover any vents and make sure that there is a space of several centimeters at the back of the unit for ventilation.
AC connection
1.
Connect the one end of the detachable power cord to the AC socket (19) and the other end to the ac outlet.
2.
Turn on the unit by press and hold On-Off/Play button (8).
DC connection
For DC operation, please insert 6 pcs size c (UM-2) battery at batter compartment (15) as below direction and please unplug the AC
socket (19) during operate with battery:-
Listening to radio
Operation
1.
Turn on the unit (8) and slide function selector (18) to select Radio mode.
2.
Turn the tuning knob (13) to set the station frequency as desired.
3.
Adjust volume knob (17) to the desired volume level.
Hints for best reception:-
-
FM : the receiver has rod antenna (12) hanging at the rear cabinet. This antenna should be totally and extended for best
reception.

Playing compact disc


Getting start
1.
Slide function selector (18) to select " CD/AUX " mode,
2.
Open the CD door (7).
3.
Place a CD with the printed side facing up inside the tray & then close the CD door.
4.
Focus search is performing, the LCD display (1) will show the total number of tracks & total playing time.

Play / pause mode
1.
Press the " play/pause
2.
To interrupt, press the " play/pause
to resume normal playback.

Stop mode
1.
If " stop " button (2) is pressed during play or pause mode, system will go to stop mode.

Skip mode (skip up
1.
During play or pause mode, if "skip up
the play or pause mode.
2.
During play or pause mode, if "skip down
Is display and remain the play or pause mode.
3.
After step 2, press "skip down
" button (8) to start playback, the first track will start playback.
" button (8) once, and the playing time will be freeze on the LCD display (1). Press again
/ skip down )
" button (9) is pressed. It will go to next track and display the track no. and then remain
" button (3) is pressed. It will go back to the beginning of the track, original track no.
" button (3) again will go to the previous track and remain the play or pause mode.
English - 2