Cramer 40LM41 Manual Del Usuario página 4

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
If any parts are damaged or missing do not operate
this product until the parts are replaced. Using a
product with damaged or missing parts could result
in serious personal injury.
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to
possible serious personal injury.
Do not insert isolator key until assembly is complete
and you are ready to mow. Failure to comply could
result in accidental starting and possible serious
personal injury.
To prevent accidental starting that could cause
serious personal injury, always remove the battery
pack from the product when assembling parts.
Never operate the mower without the proper safety
devices in place and working. Never operate the
mower with damaged safety devices. Operation of
this product with damaged or missing parts could
result in serious personal injury.
UNFOLDING AND ADJUSTING LOWER HANDLE
See figure 2.
■ Pull up and back on the upper handle to raise the
handle into operating position. Make certain the
handles snap into place securely.
■ Tighten the lower handle with the quick release
fasteners on both sides.
NOTE: Ensure both sides are set at the same position
for proper assembly.
INSTALLING THE UPPER HANDLE
See figure 3.
■ Align the mounting holes on the upper handle and
the lower handle. Insert the quick release fasteners
and use the knobs to tighten them. Repeat the
operation on the other side.
English (Original Instructions)
WARNING
WARNING
WARNING
WARNING
WARNING
INSTALLING THE GRASSBOX
See figure 4.
■ Lift the rear discharge door.
■ Lift the grass catcher by its handle and place under
the rear discharge door so that the hooks on the
grass catcher are seated on the slots.
■ Release the rear discharge door. When installed
correctly, the hooks on the grass catcher will extend
through the openings on the rear discharge door.
INSTALLING THE MULCHING PLUG
See figure 5.
■ Lift and hold up the rear discharge door.
■ Grasp the mulching plug by its handle and insert it at
a slight angle, as shown.
■ Push the mulching plug securely into place.
■ Lower the rear discharge door.
SETTING BLADE HEIGHT
See figure 6.
When shipped, the wheels on the mower are set to a
low-cutting position. Before using the mower for the first
time, adjust the cutting position to the height best suited
for your lawn. The average lawn should be between 38
mm and 51 mm during cool months and between 51
mm and 70 mm during hot months.
To adjust the blade height
■ To raise the blade height, press the height
adjustment button and lift the mower.
■ To lower the blade height, press the height
adjustment button and lower the mower.
OPERATION
Do not allow familiarity with products to make you
careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
Always wear eye protection. Failure to do so could
result in objects being thrown into your eyes resulting
in possible serious injury.
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
The use of attachments or accessories not
recommended can result in serious personal injury.
2
WARNING
WARNING
WARNING