General Safety Instructions (Us Locations) - I-DRILL 2i-drill Manual Del Usuario

f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
GB
5. Use and treatment of the batteryoperated tool
a Only use chargers to recharge the battery that have
been recommended by the manufacturer. When using
a charger designated for a particular type of battery, there
is a risk of fire if it is used with other batteries.
b. Only use the batteries designed for use in the
electric tools. The use of other batteries may lead to
injury and risk of fire.
c. When not in use, keep the battery away from paper
clips, coins, keys, nails, screws or other small
metallic objects that may bridge the contacts.
A short-circuit between the battery contacts can lead
to burns or fire.
d. Fluid can escape from the battery when used
incorrectly. Avoid all contact with this. In the event of
accidental contact, rinse with water. If liquid should get
into the eyes, get medical assistance. Battery fluid may
result in skin irritations and burns.
6. General safety information
for battery-powered screwdrivers (all locations)
Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts.
will ensure that the safety of the power tool is maintained.
7. Safety information for battery powered screwdrivers
(all locations)
a. Hold the tool by the insulated handle surfaces only
when carrying out tasks during which is it possible
that the tools will come across hidden power cables
or its own cable. Contact with a powercarrying cable
can also put metal parts of the unit under power and
cause an electric shock.
8. Safety notes for battery/charger (all locations)
a. Keep the charger away from rain or damp.
entering into the charger will increase the risk of an
electrical shock.
b. Only use chargers recommended by the
manufacturer to recharge the battery. When using a
charger designated for a particular type of battery, there
is a risk of fire if it is used with other batteries.
c. Never use to recharge third-party batteries.
charger is only designed to charge the supplied batteries
(Li-Ion) using the voltages specified in the Technical Data.
Otherwise there is a risk of fire or explosion.
d. Keep the charger clean. Contamination will increase
the risk of an electrical shock.
e. Check the charger, cable and plug each time you
use the unit. Do not use the charger if you find any
damages. Never open the charger up yourself, have
it repaired by a qualified specialist only and with
original replacement parts. A damaged charger, cable
or plug will increase the risk of an electrical shock.
f. Never operate the charger on a surface that will
burn easily (for example, paper, textiles etc) or in
a flammable environment. There is a risk of fire
occurring as a result of the heat generated during the
charging process.
g. Fluid can escape from the battery when used
incorrectly. Avoid all contact with this. In the event of
accidental contact, rinse with water. If liquid should
get into the eyes, get medical assistance.
This
may result in skin irritations and burns.
h. Do not open the battery. There is a risk of short-
circuiting.
i. Protect the battery from heat, for example, from
constant sun and fire. There is a risk of explosion.
j. Never short circuit the battery. There is a risk of
explosion.
6
k. In the event of damages and incorrect use, vapours
may come out of the battery.
and, if you have any symptoms, consult a doctor. These
vapours may irritate the respiratory system
Water

General safety instructions (US locations)

WARNING! Read and understand all instructions. Failure
to follow all instructions listed below, may result in electric
shock, fire and/or serious personal injury.
Save these instructions.
Work area
The
a) Keep your work area clean and well lit.
benches and dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep bystanders, children, and visitors away while
operating a power tool.
lose control.
Electrical safety
a) Do not abuse the cord. Never use the cord to carry
the tool. Keep cord away from heat, oil, sharp
edges, or moving parts. Replace damaged cords
immediately. Damaged cords may create a fire.
b) A battery operated tool with integral batteries or a
separate battery pack must be recharged only with
the specified charger for the battery.
may be suitable for one type of battery may create a risk
of fire when used with another battery.
Battery fluid
c) Use battery operated tool only with specifically
designated battery pack.
may create a risk of fire.
Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use tool while tired or under the influence of drugs,
alcohol, or medication.
Ensure plenty of fresh air operating power tools may result in serious personal injury.
b) Dress properly. Do not wear loose clothing or
jewelry. Contain long hair. Keep your hair, clothing,
and gloves away from moving parts.
jewelry, or long hair can be caught in moving parts.
c) Avoid accidental starting. Be sure switch is off
before plugging in.
the switch or plugging in tools that have the switch on
invites accidents.
d) Remove adjusting keys or wrenches before turning
Cluttered
the tool on. A wrench or a key that is left attached to a
rotating part of the tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance
at all times. Proper footing and balance enables better
control of the tool in unexpected situations.
f) Use safety equipment. Always wear eye protection.
Dust mask, non-skid safety shoes, hard hat, or hearing
Distractions can cause you to
protection must be used for appropriate conditions.
Tool use and care
a) Use clamps or other practical way to secure and
support the workpiece to a stable platform.
the work by hand or against your body is unstable and
may lead to loss of control.
b) Do not force tool. Use the correct tool for your
application. The correct tool will do the job better and
safer at the rate for which it is designed.
A charger that
c) Do not use tool if switch does not turn it on or off.
Any tool that cannot be controlled with the switch is
dangerous and must be repaired.
d) Disconnect the plug from the power source before
Use of any other batteries
making any adjustments, changing accessories,
or storing the tool.
reduce the risk of starting the tool accidentally.
e) Store idle tools out of reach of children and other
untrained persons.
of untrained users.
7
A moment of inattention while
Loose clothes,
Carrying tools with your finger on
GB
Holding
Such preventive safety measures
Tools are dangerous in the hands