Powering On And Off - Kobalt A081002 Manual Del Usuario

• Note that the snow thrower has a polarized male
plug – one prong in the plug is slightly longer and
wider than the other. The extension cord female end
should be likewise polarized so that the extension
cord fits snugly into the appliance plug.

2. POWERING ON AND OFF

WARNING
• The impeller starts rotating immediately after the
snow thrower is switched on. Keep hands and feet
away from the impeller.
• To switch the snow thrower ON, press the safety
switch button, then squeeze the switch bar lever.
• Once the snow thrower starts, release the safety
switch button and proceed with operation.
• To power OFF, release the switch bar lever.
3. UTILIZING THE LED LIGHT
• To utilize the LED light for nighttime snow removal,
activate the LED light switch.
NOTE: After you have finished using your snow
thrower, remember to turn OFF the LED light switch.
4. CHANGING THROW DIRECTION AND THROW
HEIGHT
WARNING
Never direct the snow discharge chute at the
operator, at bystanders, at vehicles or at nearby
windows. The discharged snow and foreign objects
accidentally picked up by the snow thrower can
cause serious damage and personal injury.
12
B C
D
W