General Safety Rules; Preparation - Kobalt A081002 Manual Del Usuario

• To prevent the appliance cord from disconnecting from the extension cord during operation, make
a knot with the two cords as shown in Table 1.
• Do not abuse the cord. Never pull the snow thrower by the cord or yank the cord to disconnect it
from the receptacle. Keep the cord away from heat, oil, and sharp edges.
• If cord is damaged in any manner while plugged in, pull extension cord from wall receptacle.

GENERAL SAFETY RULES

• Verify that the power tool is secure while transporting.
• Store the power tool in a dry area that will prevent unauthorized use or damage. Keep out of the
reach of children.
• Keep handles dry, clean, and free of debris. Clean the power tool after each use. Refer to the
Maintenance Section in this manual for more information.
• If the labels on the power tool become defaced or start to lift off, contact customer service at
1-888-356-2258.
• Keep these instructions in a safe place for future reference. Refer to them often and use them to
instruct other users. Anyone who uses this power tool must read these instructions carefully.
• Maintain the power tool with care. Follow the instructions for lubricating and changing accessories.
SAVE THESE INSTRUCTIONS

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt
to assemble the product.
Estimated Assembly Time: 10 minutes
8