Introducing The Product; Description Of Product; Model And Technical Characteristics - Key Automation KCOMW Instrucciones Y Advertencias Para Su Instalación Y Uso

EN

2 - INTRODUCING THE PRODUCT

2.1 - Description of product

KCOMW is an electronic device for the control in full safety of ga-
tes and garage doors automation and comprises a receiver COMRX
(connected to the control unit) and a maximum of 8 CONMTX
transmitters (4 for each of the two relays of the receiver) connected
to the sensitive edges. It can work both with the clean NC contact
mechanical edges (connecting in series the supplied 8,2KΩ – ¼ OF
Watt – if not already integrated in the edge) and with the 8,2KΩ ed-
ges. The two contacts of the receiver (normally closed with the po-
wered device) are independent and can be connected to the relative
input of the control unit, put in series to the stop of the control unit, or
in series to the photo devices contacts. Two contacts are also present
160 mm
2.2 - Models and technical characteristics
CODE DESCRIPTION
900COMTX 868 MHz radio transmitter for safety edge
900COMRX 868 MHz radio receiver for safety edge control
900KCOMW Radio transmitter and riceiver kit with batteries included
TECHNICAL FEATURES
Transmitter name
Receiver name
Frequency
Range of the system in free space
Transmitter power supply
Receiver power supply
Battery duration
Compatible ribs
Number of output
Number of ribs for receiver
16
25 mm
90 mm
55 mm
on COMRX receiver to be able to carry out the self – test system.
The transmission of the signals between transmitter and receiver
happens on 868 MHz band in bidirectional way.
The installation and the maintenance of the system must be
carried out by qualified personnel. The producer can not be
considered
responsible for any damages caused by an improper use, in-
correct or irrational of the product.
Warning: this device can block the automation if the batteries
of the mobile part is flat.
120 mm
COMTX
COMRX
868 MHz
15 ÷ 20 m
battery AA
12/24 Vac-dc
2 years (normal functionning mode)
5 years (power saved mode)
Mechanical and/or 8,2 KΩ
2
4 for each output
30 mm