Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

TM
3M
Noise Indicator NI-100
Clip
Green LED
Red LED
On/Off button
Operating the Noise Indicator
1. Attach the NI-100 with badge clip to shirt/jacket where
it is easily visible.
2. To turn On, press and hold button until solid red
and green lights appear. Release button.
• Flashing Green, with 1 sec. intervals, indicates noise
level is below 85 dBA.
• Flashing Red, with 1 sec. intervals, indicates
noise level is above 85 dBA.
3. To turn Off, press and hold button while the LEDs
illuminate solid red and green and then disappear.
Release button.
*NOTE: If not manually turned off, the noise
indicator will automatically power off after approximately 10 hours.

Publicidad

Tabla de contenido
loading

Resumen de contenidos para 3M NI-100

  • Página 1 Green LED Red LED On/Off button Operating the Noise Indicator 1. Attach the NI-100 with badge clip to shirt/jacket where it is easily visible. 2. To turn On, press and hold button until solid red and green lights appear. Release button.
  • Página 2 3M at 1-800-243-4630. 3M™ warrants the Noise Indicator NI-100 will be free from defective materials and workmanship for a period of thirty (30) days from the date of purchase. See website: www.3m.com/OccSafety for complete warranty.
  • Página 3 Indicateur de Bruit NI-100 Attache Voyant LED Vert Voyant LED rouge Marche/Arrêt Fonctionnement de l’indicateur de bruit 1. Fixez l’indicateur de bruit avec l’attache-badge sur la chemise/veste à un emplacement bien visible. 2. Pour l’allumer, appuyez sur Marche/Arrêt et main tenez enfoncé...
  • Página 4: Température De Fonctionnement

    3M à 1-800-243-4630. 3M™ Mérite Indicateur de Bruit NI-100 seront libres des matériels et de l’exécution défectueuses pour une période de trente (30) les jours de la date d’achat. Voir le site internet : www.3m.com/OccSafety pour la garantie complète.
  • Página 5: Tm Indicador De Ruido Ni-100

    Indicador de Ruido NI-100 Gancho LED Verde LED Rojo Encendido/Apagado Operación del Indicador de ruido 1. Sujete el Indicador de ruido con el gancho de la chapa en la camisa o chaqueta, donde sea visible fácilmente. 2. Para encenderlo, mantenga oprimida la tecla Encendido/Apagado hasta que aparezca la luz verde.
  • Página 6: Carga: Led Y Estatus

    3M al 1-800-243-4630. 3M™ Garantiza el Indicador de Ruido NI-100 serán libres de materias y habilidad defectuosas por un período de treinta (30) días de la fecha de la compra. Vea sitio web: www.3m.com/OccSafety para la garantía completa.
  • Página 7 Indicador de Ruído NI-100 Clipe LED verde LED vermelho Ligar/Desligar Operação do Indicador de ruído 1. Prenda o Indicador de ruído com o clipe do crachá à camisa/jaleco onde ele fi que facilmente visível. 2. Para ligar, mantenha pressionado o botão Ligar/Desli gar até...
  • Página 8: Especificações

    3M al 1-800-243-4630. 3M™ Garanta o Barulho Indicador NI-100 será livre de materiais defeituosos e artesan- ato durante um período de trinta (30) dias da data de compra. Veja site: www.3m.com/ OccSafety para garantia completa. Para mais informações os Estados Unido, visite: 3M Occupational Health and www.3M.com/OccSafety...

Tabla de contenido