Gree GDN20AQ-E4EBA1A El Manual Del Propietario página 13

Option 2 Gravity Drain Hose
1. Hose is not provided, so user shall prepare it in advance.
[Size: The hose thread should have an outer diameter of 11/16 inches (1.0625
inches or 27.0mm), and a pitch of 11.5 TPI.]
2. Remove bucket from the unit as instructed.
3. Thread the drain hose onto the nozzle and make sure it's securely locked.
4. Replace the bucket. Make sure the drain hose goes through the bucket's drain
the hole with a lid. Note that drain hose should not be pressed, otherwise
water can not be drained out.
Note:
When you want to take off the drain hose, prepare a receptacle to collect
water from the nozzle.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
nozzle
drain hose
9