Iv- Installing The Tubes And Setting Up The Machine - Integra MicroFrance CM201 Manual De Instrucciones

IV- Installing the tubes and setting up the machine

1
2
3
4
5
NT001
O – 2015/11
Open the pump head.
Insert the irrigation tube into the pump
head.
Ensure the positions of the tags and their
colors match up to the picture (see section
"Installing the flexible tube").
Suction: blue tag (on the left)
Exhaust: red tag (on the right)
Close the pump head.
Connect the blue side of the tube to the
liquid pouch.
Connect the red side of the tube to the
irrigation port of the cannula, turning to
lock it in place.
Figure 1 Assembly (1/2)
Page 36 sur 91