Bosch GCL Professional 2-50 C Manual Original página 24

OBJ_BUCH-2870-004.book Page 24 Monday, February 27, 2017 3:47 PM
24 | English
Working with Automatic Levelling
On/Off switch 18 in position
" "
Press 1 time
Laser
Press 2 times
Laser
Press 3 times
Laser
Laser Press 4 times
Working without Automatic Levelling
On/Off switch 18 in position
" "
Press 1 time
Laser
Press 2 times
Laser
Laser Press 3 times
Remote Control via Bluetooth®
The measuring tool is equipped with a Bluetooth® module
which uses radio technology to enable remote control via a
smartphone with a Bluetooth® interface.
For information on the necessary system requirements for a
Bluetooth® connection, please refer to the Bosch website at
www.bosch-pt.com
When remote controlling by means of Bluetooth®, time lags
may occur between mobile terminal/device and measuring
tool as a result of poor reception conditions.
Bosch applications (apps) are available for remote control-
ling. They can be downloaded in the respective stores, de-
pending on the terminal/device:
1 609 92A 2U5 | (27.2.17)
Horizontal line Vertical line
operation operation
 
Cross-line operation

–

–
– –
 
Cross-line operation
Horizontal line Vertical line
operation operation
 
Cross-line operation

–

–
 
Cross-line operation
Switching On Bluetooth®
To switch on Bluetooth®, press the Bluetooth® button 3. En-
sure that the Bluetooth® interface is activated on your mobile
terminal/device.
After starting the Bosch application, the connection between
the mobile terminal/device and the measuring tool is estab-
lished. When several active measuring tools are found, select
the appropriate measuring tool. When only one active mea-
suring tool is found, the connection is automatically estab-
lished.
The connection is established as soon as the Bluetooth® indi-
cator 2 lights up.
The Bluetooth® connection may be interrupted if there is too
much distance or there are obstacles between measuring tool
and mobile terminal/device and if there are any electromag-
netic interference sources. In this case, the Bluetooth® indica-
tor flashes.
Switching Off Bluetooth®
To switch off Bluetooth®, press the Bluetooth® button 3 or
switch off the measuring tool.
Point Indicator 5 for working
operation without automatic levelling

–
–


Point Indicator 5 for working
operation without automatic levelling
–
red
– red
– red
–
red
Figure
B1
C1
D1
E1
B1
Figure
F1
F1
Bosch Power Tools