Klarstein Light&Fire Manual Del Usuario página 22

EN
Timer setting
(1) Select the settings
Press the „TIME SET" button, and the serial number of setting starts blinking
Press the „+" or „-" to change the serial number of the setting. E.g., it is showing the
setting of No.2 .
(2) Select date
Press „TIME SET" button once again, and the cursor on the left side of date starts
blinking Press the „ " or " " keys to move the cursor to the corresponding date, press
the „+" to add the corresponding date, or press „-" to delete the date until you have
completed the selection of all dates
(3) Set the start time
1. Continue to press the „TIME SET" button, the hour starts blinking
2. Press the „+" or „-" to adjust the hour
3. Continue to press the „TIME SET" button, the minute starts blinking
4. Press the „+" or „-" to adjust minute
22