Upholstery Tool - Grundig VCC 9771 A Manual Del Usuario

OPERATION ______________________________
Operation
1
Plug in the appliance after pulling the power
plug located at the back of the appliance.
2 Press the on/off button
pliance.
Adjusting the suction power
You can increase the suction power of the appli-
ance by turning the suction power adjustment knob
located on the body of the appliance clockwise
C
according to the type of the surface to be cleaned.
To decrease the suction power, turn the suction
power adjustment knob anti-clockwise.
1 Use level to clean curtains, table clothes
and sofas.
2
Use level to clean dirty carpets.
3 Use level to clean hard floors.
4 Use level to clean extremely dirty hard
floors and carpets.
Accessories
Crevice tool
Suitable for the cleaning of
the surfaces which are difficult
to clean, such as the areas re-
maining under sofas and furni-
ture.
Upholstery tool
Suitable for cleaning the floor-
ings, stair steps, inside of the
cars, sofas, armchairs etc.
20 ENGLISH
to switch on your ap-
F
Dust brush
Suitable for cleaning the cur-
tains, and sensitive and fragile
objects.
Warning
▪
Do not make cleaning by using the handle's
end part.
Hard floor brush
The hard floor brush
hard floors such as tile, ceramic, parquet, wooden
floors etc.
It prevents potential scratches while cleaning hard
floors thanks to its specially-developed soft hair.
Warnings regarding the energy
label
This is a general-purpose vacuum cleaner. In order
to reach the highest energy efficiency and cleaning
performance class specified in carpet and parquet
cleaning, please use the high-performance par-
quet/carpet brush (multi-purpose brush)
specified values regarding the energy label were
determined according to the predefined measure-
ment methods (in line with EN60312-1).
was developed for use on
S
M
R
. The