Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO U S E
This appliance is intended for household use only.
Getting Started
• Remove all packing material, any stickers from the product, and the plastic band around the plug.
• Remove and save literature.
• Please go to www.prodprotect.com/applica to register your warranty.
• Wash all removable parts as instructed in Care & Cleaning Section of this
manual.
BLENDER JAR ASSEMBLY
1.
Turn blending jar upside down and place flat on countertop or work surface.
2.
Place the gasket against the glass jar.
Important: Gasket MUST be between the jar and blade assembly or the blender will not function
properly.
3.
Place the blade assembly, blade first, into the jar. (A).
4.
Place jar base onto jar and rotate clockwise until it is tight (B).
5.
Turn assembled jar right side up.
6.
Place lid with lid cap onto blending jar.
Note: Do not plug in the cord.
7.
Place on base, making sure it is pressed firmly
into place. (Jar base should not extend more than 1⁄8-inch
above the rim at the top of the base.)
USING YOUR BLENDER
1.
Make sure appliance is OFF.
2.
Place foods to be blended into jar.
3.
Place lid on jar; make sure lid cap is in place.
4.
Plug power cord into outlet.
Note: When in use, do not leave blender unattended. When using hard
foods, such as ice, cheese, nuts and coffee beans, keep one hand on the lid
to keep blender in place.
5. Press the High or Low button; then select the speed that best suits your
desired task. To switch speeds, press the High or Low button and the
new speed desired. (See SPEED CHART on page 8.)
6.
When blending thick mixtures, such as smoothies, power drinks and
milkshakes press the Pulse button several times to begin the blending
process. Use Pulse for no more than 5 seconds at a time, allowing the blender to rest briefly
between each pulse, for no more than 2 minutes total. This helps break up the ice and distribute
the ingredients.
7.
Open the lid cap to add ingredients while the blender is running and drop
ingredients through the opening (C).
Important: Do not remove the lid while the blender is running.
8.
When finished, press the Pulse/Off button. Make sure blades have
completely stopped before attempting to remove the blending jar from
the base.
9.
To remove the jar, grasp the handle and lift straight up. Do not twist the jar.
10. Remove lid to pour.
11.
Always unplug the appliance when not in use.
6
A
B
C
HOW TO
BLEND
1. Liquid FIRST!
2. Powders
3. Soft foods
4. Hard foods
5. Ice cubes LAST.
Publicidad
Tabla de contenido
