Maintenance; General Description; Panel Description - GRUPO temper KOBAN KP 2600 Manual Del Usuario

Pinza amperimétrica digital con maxilar abierto
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

KP 2600
Open jaw digit electrical tester
• Do not expose the instrument
to direct sunlight, extreme
temperature or moisture.
• Never ground yourself when
taking electrical measurements.
Do not touch exposed metal
pipes, outlets, fixtures, etc., which
might be at ground potential.
Keep your body isolated from
ground by using dry clothing;
rubber shoes, rubber mat, or any
approved insulating material.
• You always are careful when
working with voltages above 60V
dc or 30V ac rms. Keep fingers
behind the probe barriers while
measuring.
• Never use the meter to measure
voltages that might exceed the
maximum allowable input value of
any function.
• Never touch exposed wiring,
connections or any live circuit
when attempting to take
measurements.

Maintenance

• Before opening the case, always
disconnect test leads from all
energized circuits.
• Never use the meter unless the
back cover is in place and fastened
completely.
• Do not use abrasives or solvents
on the meter. To clean it using a
damp cloth and mild detergent
only.
Instructions manual |
16
• Qualified and trained service
technicians should only perform
calibration and repair of the meter.
• Do not attempt calibration or
service unless trained and another
person capable of rendering first
aid and resuscitation is present.

General description

The meter is an autorange
professional open jaw digit electrical
tester with 3999 counts. For
measuring DC and AC voltage, AC
current, Resistance, Capacitance,
Frequency, duty cycle, Diode
and Continuity Test with battery
operated.

Panel description

1. Transformer jaws
Pick up the AC current flowing
through the conductor.
2. Hold button
When this button is pushed, the
display will keep the last reading
and symbol
will appear on the
LCD until pushing it again
When this button is pressed more
than two second, the light of
display is on until pressing it more
than two second again.
3. Rotary switch
This Rotary Switch is used to select
functions and power supply of the
meter on or off.
4. Function button
www.grupotemper.com

Publicidad

Capítulos

Tabla de contenido
loading

Productos relacionados para GRUPO temper KOBAN KP 2600

Tabla de contenido