Installation - New Construction - HAMPTON BAY 7134-01 Guía De Uso Y Cuidado

Installation - New Construction

CAUTION: Make sure power is switched off at service
panel before starting installation.
NOTE: Ceiling mount only.
1
Remove the wiring box knockout
 Remove the wiring box cover from the fan housing. Remove
the wiring knockout from the wiring box cover with a flathead
screwdriver (not included).
2
Fan housing placement
 Place the fan housing next to a ceiling joist or wall stud. The
fan housing should be level and perpendicular to the joist or
stud.
3
Mount the fan housing
 Mount the fan housing to the joist using two long wood screws
(D) where indicated.
Ceiling joist
6
Joist or
wall stud