First Use - Spanset Joker ASH 1t Borrador De Las Instrucciones

The textile sling must lie fully in the joker hook and not be pinched,
because this is the only way to guarantee the sling's nominal load
capacity. Joker hooks are drop forged from class 8 steel.
It is safe to use joker hooks within a temperature range of -40°C to
+200°C. When used in combination with textile slings, the lower
operating temperature of the textile slings (e.g. PES max. 100°C) limits
the range of applications.
Never stay in the danger zone!
Plan the load's fastening, lifting and lowering process with the
greatest of care before the actual lifting process. Reckless
fastening can damage the load or endanger employees' life and
health!
3 Operating joker hooks

3.1 First use

Before first use, the user must inspect the lifting straps/belt strap
hangers for compliance with the order, completeness of accompanying
documents (e.g. declaration of conformity and manufacturer certifica-
te) and conformance of the data in the accompanying documents with
the product labels. Upon first use, an authorized person must make a
visual check and document it according to BGR 500. For this, a chart
can be created or an inspection card filled out and saved. Equipping
products with RFID tags and electronic documentation of commissio-
ning, such as with IDXpert
routine described.
3.2 Mounting
Joker hooks must be combined only with round slings and lifting
straps of the same load capacity. Always observe the geometries of
the joker hook, lifting strap loops and fastening points to the load (see
3.3 and 3.4).
Page
EN
12
(database), speeds up and simplifies the
®