Switching On/Off; Preventive Maintenance - SUHNER ABRASIVE SHS 700 Documentación Técnica

3.2 Switching ON/OFF

Switching ON/OFF is described in the technical
document ROTO TT.
Introduce the flexible shaft into the hand pieces until it
snaps audible. By pressing the lever, the connection is
made to the blade. By releasing the lever, the connection
is lost to the blade.
4. S
ERvICE

4.1 Preventive maintenance

4.1.1 Cleaning
The hand piece and the blade must be
cleaned and disinfected daily with drink-
ing water at ≥ 80 °C in accordance with
DIN 10516:2009-05, table 3.
When daily cleaning, examine all parts for wear,
fracture, cracking, or other signs of damage. Make
sure particularly that meat and other residue is re-
moved regularly. Dismantle the blade according to sec-
tion 2.1.2 and the depth gauge according to section 2.1.3
Pull the pinion out of the head piece. Unscrew the grease
cup from the head piece.
Very sharp blade!
26
/ m
aINTENaNCE
Dissolve the tension nut with a socket spanner and pull
them out.
Pull the handle and the ring off from the mount. Unscrew
the mount from the head piece. Pull the spacer sleeve out
of the mount.
Loose the screw and remove the lever.
Unscrew the pipe of the flexible shaft and decompose
it into parts. The coupling is provided with a left hand
thread. Clean the parts thoroughly with a brush and de-
tergent. Rinse with water and let it dry. Do not use ag-
gressive detergent! To connect the hand pieces, follow