Mestra R-100136 Instrucciones De Uso página 9

Baño de limpieza por ultrasonidos
Ocultar thumbs Ver también para R-100136:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

10. Working status
Green: Normal working status, ready to use.
Red:
Ander overheat protection. 20 minutes or more of waiting time is hended for the light to change
from red to green. Work can resume afterwards.
11. Heater button
button twice, the icon
Press
again, the icon
When the water reaches the set temperature, the heater will turn off automatically.
12. Function button
Press Function button
press
button again,
Degas:
When cleaning heavily soiled of greasy items or silver, copper or brass items, chemical solutions need to
be added into the water. The solution may form many small droplets and take a long time to dissolve in
the water. Newly added water may enerate many air bubbles on the tank walls. These will reduce the
cleaning effect in the beginning phase of ultrasonic cleaning. Turning on the degas function will dissipate
the droplets and the air bubbles, usually in 90 seconds, and improve cleaning efficiency.
13. On/Off button
14. 
Decreasing button
a. When
b. When
c. When
Solution usage timer set button
15.
Each time that
that the solution is set to be used for 1 hour and 20 minutes. The maximum time can be set is 9 hour
60 minutes.
16. Timer quick set button
Press
button, LED display shows
flashes, indicating the heater is turned on. Press
dims, indicating the heater is turned off.
. The icon
dims, indicating the heater is turned off.
:
Alter powering on, the LED displays which is the default time (as picture shown), and
the unit is ready with the normal working status. Press
cleaning starts. The cleaning stops when the timer counts down to
needs to be stopped before the timer runs out, press
is used, each pressing reduces the timer by 1 minute.
is used, each pressing reduces the set temperature down to the next level.
is used, each pressing reduces the solution set time by 20 minutes.
button is pressed, the timer is increased by 20 minutes. For example, 1:20 indicates
illuminates, indicating the heater is turne don. To cancel heating,
. Each pressing increases the time by 5 minutes.
button twice
button twice and the
. If the unit
button twice.
9

Publicidad

Tabla de contenido
loading

Tabla de contenido