Insert A Micro Sd Card; Hardware Installation - Velleman CAMIP14n Guía Rápida

Cámara ip push video 1.3 megapíxeles - eagle eyes
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

4.
Overview
1
white LED light
2
speaker
3
microphone
4
camera lens
5
antenna
6
status LEDs:
7
PIR sensor
5.

Insert a Micro SD Card

You can record video to a micro SD card. The micro SD card slot is on the side of the camera.
For a list of compatible micro SD cards, please refer to user guide on the cd.
Notes
The camera does not support hot-swapping. Insert or remove the micro SD card with power
disconnected.
Any data on the micro SD card will be deleted when you insert the card and turn on the camera.
6.

Hardware Installation

1.
Fasten the round base of the bracket to where you want to install the camera. The distance between
your camera and the location you want to monitor should be 3 to 4 metres.
2.
Assemble the bracket and the camera, and adjust the viewing angle of the camera.
3.
Fasten the antenna for wireless network connection.
4.
Plug the included power adapter into the camera and connect it to a power socket.
V. 02 – 31/03/2014
front
= lan,
= internet
CAMIP14n
8
WPS button (Wi-Fi Protected Setup)
9
micro SD card slot
10
ethernet connection
11
power jack
12
external I/O port
13
bracket
14
reset button
3
back
©Velleman nv

Publicidad

Tabla de contenido
loading

Tabla de contenido