Velleman CAMIP14n Guía Rápida página 8

8. Set a camera to record to an SD card
In EagleEyes, you can set a camera to record to its SD card as follows:
1. Select the camera and tap
the Settings button
6.
Open the Trigger setting.
V. 02 – 31/03/2014
CAMIP14n
2. Under Record
Configuration, set the
.
resolution to SXGA
/HD720P.
7.
Make sure the settings are
as shown above.
3.
4.
5.
8.
8
Set the option Triggered
by to Internal Alarm.
Tap Save on the bottom of
the page.
Tap Advanced.
Save and exit the page.
©Velleman nv