Reception Problems; Restarting Radio Reception - Auriol 4-LD4587 Manual Del Usuario

reception indicator 7 will blink on the display. This
process can take from 3-10 minutes.
Please note: Do not move the alarm clock during the
reception process.
The alarm clock synchronizes the internal clock every
day from 01:00 to 04:00 on each full hour. If
reception is unsuccessful, the clock will reattempt
reception at 05:00 and 06:00. Please set the time
manually, if reception fails (see "Basic settings").
If reception is successful, the radio reception indicator
appears permanently on the display and the time,
date and day of the week are set automatically. During
daylight saving time,
Please note: If you are in a country, in which the clock
displays the wrong time even though it can receive the
time signal, please use the time zone adjustment to use
your alarm clock in a time zone other than the
standard time zone (UTC+1 = Central European Time).
Set the difference in hours (- 01 for example) to the
desired time zone. Restart radio reception after
changing this setting. Your clock receives the DCF77
9 appears on the display.
- 71 -
time signal but will show the adjusted time (1 hour less
for example).

Reception problems

The DCF77 radio control signal is transmitted from a
location near Frankfurt am Main and can be received
at a distance of up to 1500 km. However, there are
some obstacles and sources of interference, which may
substantially hinder reception. If your alarm clock does
not correctly receive the DCF77 radio signal, please
place the alarm clock in a different location at your
site. Please note that devices such as computers,
telephones, radios and televisions may cause
electromagnetic radiation which can interfere with the
DCF77 radio signal reception. Other possible
detriments to reception are: strong building insulation
(metal building materials), nearby mountains or
atmospheric interference. It may also be necessary to
replace the batteries.

Restarting radio reception

Press and hold 13 to restart radio time signal
reception. Please set the time manually if reception fails
(see "Basic settings").
- 72 -