Steren WR-2050 UHF Manual Del Usuario página 25

SYNCING THE MICROPHONE AND THE RECEIVER
Before to start, open the cover of the transmitter
Turn on the transmitter
and the receiver
Keep open the cover
The microphone can be used, only adjust the volume level in the receiver with
CHANGING GROUP AND CHANNEL
1- Press . The first number (group) will start to blink; change it with
2- Press again . The second number (channel) will start to blink; change it with
3- Press to end.
In the transmitter
1- Press and hold
2- The first number will start to flash, press
second number start to flash, press
3- Wait for few seconds until both numbers remains fixed.
IR ASC
until appear the group number.
to change
Press
POWER
The message Infrared
appears on screen
-3 03 dBV
In both screens must
appear the same
frequency
to change it. Press and hold
IR ASC
POWER
SET
until the
!
25