Troubleshooting; Ec Declaration Of Conformity - Black+Decker BXVC15PE Manual De Instrucciones

Ocultar thumbs Ver también para BXVC15PE:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 44
ENGLISH

10 TROUBLESHOOTING

Problem
The appliance does not switch on
The appliance does not suck in
material, or sucks only weakly
(*) If the motor stops and does not restart during operation, wait 2-3 minutes before repeating the start-up procedure (Overload cutout has been tripped).
If the problem recurs more than once, contact your nearest Authorised Service Centre.
We, Annovi Reverberi S.p.A, of Bomporto (Modena), Italy, declare that the following Black+Decker appliance(s):
Designation of appliance: Wet&dry vacuum cleaner
Model No.:
Rated power:
is (are) compliant with the following European directives: 2006/95/EC, 2004/108/EC, 2011/65/EU and 2012/27/EU (Italian Legislative Decree 262/2002).
and was (were) produced in compliance with the following norms or standardised documents:
EN 60335-1; EN 60335-2-2; EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3; EN 62233;
Name and address of the person responsible for issuing the technical file: Stefano ReverberII / AR Managing Director
Via ML King, 3 - 41122 Modena, Italy
The conformity assessment procedure required by Directive 2000/14/EC has been performed in accordance with Annex V
Model No.:
Measured sound power level:
Guaranteed sound power level
Date: 28.09.2015
MODENA (I)
Stefano Reverberi
The validity of the warranty is in accordance with the relevant legislation in the country where the product is sold (unless otherwise stated by the producer).
The warranty covers materials, construction and conformity defects during the warranty period, during which time the manufacturer will replace defective parts
and repair the product if not excessively worn, or replace it.
The warranty does not cover components subject to normal wear and tear (valve, piston, water gasket, oil gasket, springs, O-rings, accessories such as the
hose, gun, brushes, wheels, etc.);
The warranty does not cover defects caused by or arising from:
- improper use, misuse, negligence,
- professional use or hire, if the product was sold for domestic use,
- failure to comply with the maintenance instructions provided in this manual,
- repair by unauthorised staff or centres,
- use of non-genuine parts or accessories,
- damage caused by transport, by dirt or foreign bodies, accidents,
- storage or warehousing problems.
Proof of purchase must be submitted to obtain warranty cover.
14
(Original instructions)
Possible causes
No electrical power
Problems with the electric-electronic circuit
Accessories fouled
Filters dirty
Bags full
Tank full

EC Declaration of conformity

BXVC15PE
1.2 kW
BXVC15PE
89 dB (A)
92 dB (A)
Managing Director
WARRANTY
Check that the plug is firmly in the socket and that the mains
voltage supply is present (*)
Contact the Service Centre
Check and clean the nozzles, extensions or hoses
Clean the filters
Empty / change bags
Empty the tank
BXVC20PE
BXVC20XE
BXVC20PTE
BXVC20XTE
1.2 kW
1.4 kW
BXVC20PE
BXVC20XE
BXVC20PTE
BXVC20XTE
89 dB (A)
89 dB (A)
92 dB (A)
92 dB (A)
Remedy
BXVC30PDE
BXVC30XDE
BXVC30PTDE
BXVC30XTDE
1.6 kW
1.6 kW
BXVC30PDE
BXVC30XDE
BXVC30PTDE
BXVC30XTDE
89 dB (A)
89 dB (A)
92 dB (A)
92 dB (A)

Publicidad

Tabla de contenido
loading

Tabla de contenido