Before You Start; Installing The Microsd Card; Charging The Battery - TrekStor Portable WLAN HotSpot Manual De Instrucciones

Before you start

Installing the SIM Card and the Battery
Install the SIM card into the SIM card slot located under the back cover of the device. Ensure that
the SIM card faces the direction as shown in the following figure. Then slide in the SIM card.

Installing the microSD card

a) Remove the rubber cap from the microSD card slot. Then insert the microSD card into the slot.
b) After inserting the microSD card completely, attach the rubber cap.
i
• The microSD card is an optional accessory. The
can buy one yourself.
• To remove the microSD card, open the rubber cap and press the microSD card gently.
When the microSD card pops up automatically, take it out.
• Do not remove the card when it is being used. Otherwise, the card and the Portable WLAN
HotSpot may be damaged, and the data stored on the card may be corrupted.

Charging the Battery

If you have not used the battery for a long time, please charge it first.
i
Charging by Connecting to a PC
a) Power off the Portable
WLAN HotSpot.
b) Connect the Portable WLAN
HotSpot and PC with a
compatible data cable.
EN
14
microSD card is not provided in the package, you