TrekStor Portable WLAN HotSpot Manual De Instrucciones página 15

Accessing the Internet through a Wi-Fi Connection
By default, presets for the management parameters are on the SIM card according to the
i
requirements of the service provider. You can follow the steps below to quickly access the
Internet. For the details about how to set the management parameters, see the "Help" on
the "Web management" page.
Step1: Power on the Portable WLAN HotSpot.
Step2: Establish a Wi-Fi Connection.
Step3: Access the Internet.
1. Power on the Portable WLAN HotSpot
Press and hold "POWER" until
the screen is illuminated. When
the screen lights up, it indicates
that the Portable WLAN HotSpot
is powered on.
To turn off the device, press and hold "POWER" until the screen is off. When the screen is off, it
i
indicates that the Portable WLAN HotSpot is powered off.
2. Establish a Wi-Fi Connection (Taking a PC for Example)
a) Make sure that the Wi-Fi function is enabled.
b) Select Start > Control Panel > Network Connections > Wireless Network Connection.
To set up a Wi-Fi connection, the PC must be configured with a wireless network adapter.
i
If "Wireless Network Connection" is displayed, the wireless network adapter is available.
Otherwise, you need to check your wireless network adapter.
c) Click "View available Wireless Networks" to display the wireless network list.
d) Select the network whose SSID is the same as that of the Portable WLAN HotSpot, and then
click "CONNECT".
EN
15