Operation - HAMPTON BAY LUXENBERG 91136 Guía De Uso Y Mantenimiento

Assembly - Attaching the Light Kit
2
Installing the bulbs and attaching the
glass bowl
CAUTION: Make sure the power is off before attaching or
removing the glass shade.
CAUTION: Over lamping the fan will result in the fan lights
shutting down until the proper wattage bulbs are installed.
Reset the lights by turning off the power, replacing the bulbs
with the correct wattage bulbs, and turn the power on.
WARNING: Allow the glass shade to cool completely before
removing.
□
Gently slide the glass shade (F) over the steel tensioners
(V V). Make sure the glass shade is fully inserted into the
socket for a secure fit. Repeat for the remaining glass
shades (F).
□
With the power off, insert and tighten the light bulbs (I) into
light kit sockets.
□
Attach the pull chain extensions (BB).

Operation

Turn on the power and check the operation of the fan. The pull
chain controls the fan speeds as follows:
1 pull - High, 2 pulls - Medium, 3 pulls - Low, 4 pulls - off
The appropriate speed settings for warm or cool weather depends
on factors such as the room size, ceiling height, and number of
fans.
The slide switch controls (XX) the direction of the blades:
Forward (switch down) or Reverse (switch up).
NOTE: Wait for the fan to stop before reversing the direction of
blade rotation.
A. Warm weather - (Forward) A downward airflow creates a cooling
effect. This allows you to set your air conditioner on a warmer setting
without affecting your comfort.
B. Cool weather - (Reverse) An upward airflow moves warm air off
of the ceiling. This allows you to set your heating unit on a cooler
setting without affecting your comfort.
E
F
I
13
Please contact 1-855-HD-HAMPTON for further assistance.
D
V V
BB
A. Warm weather
XX
B. Cool weather
XX
HAMPTONBAY.COM