Controls And Indicators - Cooper 735r Manual Del Usuario

Controls and Indicators

The main printed circuit board (pcb) contains the following controls and indicators:
LK1 Mode jumper. Link fitted: LK3 selects N/O or N/C for external switches
connected to Alarm contacts. Link not fitted: LK3 selects either roller shutter or
shock sensor.
LK2 Link fitted: disable internal reed switch.
LK3 Selector, works in conjuction with LK1
LK4 Programming. Link fitted: program roller shutter extension or shock sensor
vibration level. Link not fitted, normal operation.
LED Continuous flashing: Programming mode. Flashing in groups of four:
transmission. Off: normal operation.
SPECIFICATION
Part No.
Power Supply
Battery Life
Temperature Range
Low voltage alarm
Environmental Class
Security Grade
INCERT No.
735rEUR-50.
Two AAA Alkaline batteries.
Approximately 14 months.
-10 to +55 °C.
2.4V nominal.
I (Tested -10 to +55°C)
II
C0160196
8