Door Contact - Cooper 735r Manual Del Usuario

INSTALLATION
Siting
Do NOT mount the unit:
Near the floor.
Close to or on large metal structures.
Closer than one meter to mains wiring and metal water or gas pipes.
Inside steel enclosures.
Next to electronic equipment, particularly computers, photocopiers or other radio
equipment.
Upside down or on its side.

Door Contact

Where possible mount the body of the transmitter close to the top of the non-moving frame
of a door or window, and the magnet on the moving part. If the frame is not wide enough,
mount the magnet on the frame and the body on the moving part.
DO:
Make sure there is less than 10mm between magnet and transmitter body with the
door/window closed.
Make sure the magnet aligns with the mark moulded into the side of the case with the
door/window closed.
Do NOT mount the unit on the hinged edge of the door.
9
EN