Technical Specifications - ResMed Mirage Micro Guia Del Usuario

Technical Specifications

Note: The mask system does not contain latex, PVC or DEHP materials.
Pressure–Flow
Curve
Dead Space
Information
Standards
Therapy
Pressure
Resistance
Sound
Environmental
Conditions
Gross
dimensions
Note: The manufacturer reserves the right to change these specifications
without notice.
Storage
Ensure that the mask is thoroughly clean and dry before storing it for any
length of time. Store the mask in a dry place out of direct sunlight.
Disposal
The Mirage Micro does not contain any hazardous substances and may be
disposed of with your normal household refuse.
As a result of manufacturing variations, the vent flow rate may
vary.
50
45
40
35
30
25
20
15
10
5
0
4 6 8 10
Mask Pressure (cm H
The dead space of the mask varies according to cushion size. It
is 3 mL for the Extra Large size.
CE designation in accordance with EC directive 93/4/EEC,
class IIa. ISO 49, ISO 34, ISO 0993- and ISO 0-.
4 to 0 cm H O

Drop in pressure measured (nominal)
at 0 L/min: 0.4 cm H
at 00 L/min: . cm H
The A-weighted sound power of the mask is .3 dBA.
Operating temperature: +°C to +40°C
Operating humidity: 0%–9% relative humidity
non-condensing
Storage and transport: -0°C to +0°C
Storage and transport humidity: 0%–9% relative humidity
non-condensing
S: 40 mm (H) x 9 mm (W) x 93 mm (D)
M, L, LW, XL:  mm (H) x 9 mm (W) x 9 mm (D)
Mask fully assembled – no headgear.
12 14 16 18
O)

O

O


Pressure Flow
(cm H O) (L/min)
2
4 9
 
 34
 40
0 4
20