Machine Setup - LAVAZZA EP951 Instrucciones De Empleo

The company will not be responsible for any
damages in the following cases:
• incorrect use and not in conformity with the
intended purpose;
• repairs made by other than an authorised
service facility;
• tampering with the power cable;
• tampering with any part of the machine;
• use of spare parts and accessories other
than the originals;
• failure to decalcify;
• storage in a place at a temperature below 4°C
(39,2°F);
• use of capsules other than those indicated.
The guarantee is no longer valid in these
cases.
MACHINE START UP
Position the machine on a flat stable surface away
from sources of water and heat. Ensure that the
machine is disconnected from power supply. Any
damages caused to the machine through failure
to follow these instructions are not covered by the
guarantee.
The use of a water filter
(an optional accessory)
improves water quality
and prolongs machine
life.
Use the AquaAroma
Crema Brita for Lavazza
filter.
In order to insert the
filter, follow the instruc-
tion sheet which comes
with the accessory.
MACHINE SET-UP
Lift out the water tank and open the lid.
1
Rinse the tank before use.
2
Fill the water tank up to the MAX level indicated
using only fresh, non-bubbly, drinking water.
Hot water and other liquids can damage the tank.
Do not operate the machine without water; ensure
that the water level is above the MIN indicator.
Plug in the machine and press the general
3
switch, setting it at the I position.
The supply buttons blink alternately.
When the buttons come ON steadily, the ma-
chine is ready for use.
EN
MAX
MIN