Urmet 1083/58 Manual De Configuración página 17

• 1083/58 for Voice systems.
• 1722/58 for systems with kit 17/81, /83, /84,
/85 and /86.
• 1723/58 for systems with kit 173/71, /7.
• 9854/58 4+N systems.
Please choose the device to con gure
Select the device to be configured
4. For /58A devices, scan the Qr-Code on the device.
For /58 devices, go directly to step 6.
Please scan the QR code on your device
QR-Code scan request
5. Press the "Scan" button to launch the Qr-Code
reader application on your smartphone. If no
applications are present, open the Apple Store (iOS)
or Play Store (Android) to download a recommended
app.
DS1083-106
XXXX/58
1XXX/58A
Scan
Scan the QR-Code to registered the device on
the server.
6. The following page will appear:
Make sure the device is switched on
and that the red led is blinking.
If the red led is not blinking, hold
the reset button pressed between
2 and 4 seconds to switch the
device back on.
Configuration instructions
7. After selecting "Continue", activate the Wi-Fi on
your smartphone and access the Wi-Fi network
created by your device. For /58A devices, access
the "cALLfW" network.
Connect the smartphone/tablet
to the wi- network of the device
Wi-Fi network devices /58A
For /58 devices, access the "cALLfW-XXXX"
network (e.g. CALLFW-134) and enter the
password.
The password consists of the number present in
Continue
CALLFW
Continue
17