Urmet 1083/58 Manual De Configuración página 18

the Wi-Fi name repeated twice with the "-" symbol
between the first and second number.
For example, for CALLFW-1234 the password is
1234-1234.
Connect the smartphone/tablet
to the wi- network of the device
URMETCALLFW-XXXX,
if requested use the password
Wi-Fi network devices /58A
8. On the next page you will be able to choose the
name that you wish to give to your device (the name
that will be displayed as 'Caller' when you receive
an incoming call). We recommend setting your
home address (street or city name) as the device
name. Now press "Enter" and then "Continue".
Enter device name
(the name will appear on the
smarphone/tablet whenever you
receive a call)
Mountain house
Enter the device name
18
XXXX-XXXX
Continue
Continue
9. To operate, the device must be connected to
your home LAN network and this in turn must be
connected via a modem/router to the Internet.
The connection to your home LAN can be achieved
via wire or by hooking up to your home Wi-Fi.
Choose which type of connection you wish to use
- either "Wire" or Wi-Fi ("Wireless").
Choose connection
Choose the connection type
If you choose the wired connection, you will go
directly to the IP address configuration step (see
below).
If you choose to connect via Wi-Fi, the following
screen will appear:
Choose connection
LAN_Solo
Wi-Fi Password
Connection via Wi-Fi
type
Wire
Wi-Fi (default)
Continue
type
Wire
Wi-Fi (default)
Advanced
Continue
DS1083-106