Urmet 1083/58 Manual De Configuración página 19

It is essential to select from the dropdown menu the
(home) network to connect to.
Tick "Advanced" only for access to special
settings, e.g. access to hidden networks.
10. After you have selected it, press "OK" to confirm.
In the next screen enter the network Password and
press "Continue" With the wireless configuration
it is optionally possible to identify up to two time
intervals during which the Wi-Fi will be automatically
switched off daily (e.g. nightly from 11:00 P.M. until
7:00 A.M.): during these intervals, the LED on the
Call Forwarding Device will be lit (steady orange
light).
Choose when to switch o
Wi-Fi connection
Interval 1
00:00
Interval 2
00:00
Wi-Fi Switch-off Intervals
DS1083-106
00:00
00:00
Continue
After setting the time intervals (as an optional
operation) press "Continue" to go to the next page.
IP routing options
Default (recommended)
Advanced
IP Routing Mode
11. It is preferable to choose the default configuration
options. Should this be not possible, if the network
to which you wish to connect requires a fixed IP
address, select the option "Advanced" to open the
following page:
IP routing options
Default (recommended)
Advanced
IP address
Subnet mask
Default gateway
DNS
Advanced Settings
12. Enter the following values in the empty fields: IP
Address, Subnet Mask, Default Gateway and DNS
(e.g.: 8.8.8.8) then press "Continue".
Continue
Continue
19